Reviews

The Aero-Modeler traditionally had two choices for their models if they needed retractable landing gear. Pneumatic air and servo assisted mechanical retracts. Now our third choice is electric. LADO Technologies has developed an extensive line of electric retracts. For this review, I will be critiquing the 60 sized, 85 degree drop in replacements for Hanger 9 planes.

Continue Reading LADO 60-1 Electric Retract Review

When looking for a new power source for my RC Bug, I ran across a very unusual motor from Dualsky. This tiny outrunner contains a 6 amp brushless speed controller in the motor housing. That means you get a matched motor and ESC with no hassles of soldering bullet connectors or checking which way the motor spins, and less wire clutter when installed. Read on for our review.

Continue Reading Dualsky XMotor Review

The FMA Direct Cellpro 10s is a balancing lithium battery charger, capable of charging a single battery up to 10 cells, or two batteries simultaneously up to 5 cells, with power up to 10 amps. It can handle lithium polymer, lithium ion, and the M1 lithium cells from A123 Systems. Let's dig in and put it through its paces.

Continue Reading FMA Direct Cellpro 10s Charger Review

The Align T-Rex 450 series is perhaps the best known of the mini-size electric helicopters. Many reviews are available online, including this thorough one at T-Rex Tuning. In this article I'm going to sum up the positive and negative experiences I had building the 450S aluminum kit, and include a list of tips to help you out.

Continue Reading Align T-Rex 450S Build Notes

The eLogger V3 from Eagle Tree Systems is an in-flight data logger which continuously records volts, amps, watts, and milliamp-hours to enable pilots to analyze the performance of their electric power systems. In addition, it supports a wide variety of optional sensors to record altitude, airspeed, component temperatures, RPM, and more.

Continue Reading Eagle Tree Systems eLogger V3 Review

In the RC world, one of the things that we think about most is getting the absolute best power from our vehicles that we can. One element that is crucial to having the best power possible from your vehicle is a well matched exhaust system that can complement the power of your motor.

Continue Reading BUKU Self-Tuning Exhaust System Review

The ElectriFly Reactor 3D from Great Planes is a 41" wingspan, mid-wing acrobatic plane. It is aimed at intermediate and expert pilots looking for a 3D-capable park flyer. With huge control surfaces and no dihedral, I was really excited to build this plane and get up in the air.

Continue Reading ElectriFly Reactor 3D Review

One of the most well known things about HPI is their "Savage" line up of vehicles. The savage has been around for many years, and has always been considered one of the toughest trucks on the block. HPI has just recently released another Savage, the Savage X 4.6 RTR.

Continue Reading HPI Savage X 4.6 Review

Since I made my first post on this project a few days ago, my Micro-T has gone through almost a complete overhaul. I am about $300 deep in this project out of my pocket, and I must say, it has been worth every single penny! My micro is by far one of my favorite vehicles that I have owned.

Continue Reading Ultimate Micro-T: Part II

Team Losi has put everything great about the Mini-T into an even SMALLER package, the 1/36th scale Micro-T!

Continue Reading Project: Ultimate Micro-T!